• fish45a posted an update 1 week, 2 days ago

    Feature
    Viewing angle:120 deg
    The materials of the LED dice is InGaN
    3.50mm×2.80mm×0.8mm
    RoHS compliant lead-free soldering compatible
    Package Outline
    Unit:mm
    NOTES:
    1. All dimensions are in millimeters;
    2.Tolerances are±0.05mm unless otherwise noted.
    ●Absolute maximum ratings Ta=25±3℃
    Parameter Symbol Value Unit
    Power dissipation Pd0.5W
    Forward current If60mA
    Reverse voltage Vr5V
    Operating temperature range Topr-20~+85℃
    Storage temperaturer range Tstg-40~+100℃
    Pulse Forward Current Ifp90mA
    Electrostatic Discharge ESD2000(HBM)V
    ●Electro-optical characteristics Ta=25±3℃
    Parameter Test ConditionSymbolValue Unit
    Min.TypMax.
    Forward voltage If=60 mA Vf 8.8 — 9.6 V
    Luminous intensity If=60 mA Φ 60 — 70 Lm
    Viewing angle 50% Iv If=60 mA 2θ 1/2 — 120 — Deg
    Reverse current Vr=5V Ir — — 10 μA
    ColorTemperature If=60 mA TC 2500 — 7500 K
    Chromaticity CIE If=60 mA CIE
    CRI If=60 mA Ra ≥80
    NOTES:
    1. Luminous Flux measurement tolerance:±10%
    2. Forward Voltage measurement tolerance:±0.1V
    3. Color Temperature measurement tolerance:x,y±0.01
    4. CRI measurement tolerance:±2
    ● Typical optical characteristics curves
    ● Intensity Bin Limit (IF = 60 mA)
    Bin code Flux(lm) for reference
    MinMax
    2500K-3500K 60 65
    3500K-7500K 65 70
    ● VF Bin Limit (IF = 60 mA)
    Bin codeMin.(V)Max.(V)
    1 8.8 9.0
    2 9.0 9.2
    3 9.2 9.4
    4 9.4 9.6
    ● Chromaticity CIE

    ● Color Bin Limit (IF = 60 mA)
    2500-2600-2700K2700-2800-2900K2900-3000-3100K3100-3250-3400K
    代码 X Y 代码 X Y 代码 X Y 代码 X Y
    26A 0.4521 0.385128A 0.4375 0.38230A 0.4242 0.377932A 0.4092 0.3724
    0.4627 0.4028 0.4468 0.3994 0.4324 0.395 0.4164 0.3889
    0.4713 0.4045 0.4546 0.4014 0.4394 0.3973 0.4264 0.3938
    2500-2600 0.4603 0.38682700-2800 0.4448 0.38382900-3000 0.4306 0.383100-3250 0.4184 0.3769
    0.4521 0.3851 0.4375 0.382 0.4242 0.3779 0.4092 0.3724
    26B 0.4627 0.402828B 0.4468 0.399430B 0.4324 0.39532B 0.4164 0.3889
    0.4739 0.4215 0.4566 0.4179 0.441 0.413 0.4239 0.4064
    0.4829 0.4234 0.465 0.42 0.4488 0.4156 0.4348 0.4118
    2500-2600 0.4713 0.40452700-2800 0.4546 0.40142900-3000 0.4394 0.39733100-3250 0.4264 0.3938
    26C 0.4739 0.421528C 0.4566 0.417930C 0.441 0.41332C 0.4239 0.4064
    0.4858 0.4414 0.4671 0.4374 0.4502 0.4321 0.4319 0.425
    0.4952 0.4433 0.476 0.4397 0.4587 0.4349 0.4437 0.4308
    2500-2600 0.4829 0.42342700-2800 0.465 0.422900-3000 0.4488 0.41563100-3250 0.4348 0.4118
    27A 0.4448 0.383829A 0.4306 0.3831A 0.4184 0.376934A 0.4011 0.3689
    0.4546 0.4014 0.4394 0.3973 0.4264 0.3938 0.4075 0.3851
    0.4627 0.4028 0.4468 0.3994 0.4324 0.395 0.4164 0.3889
    2600-2700 0.4521 0.38512800-2900 0.4375 0.3823000-3100 0.4242 0.37793250-3400 0.4092 0.3724
    0.4448 0.3838 0.4306 0.38 0.4184 0.3769 0.4011 0.3689
    27B 0.4546 0.401429B 0.4394 0.397331B 0.4264 0.393834B 0.4075 0.3851
    0.465 0.42 0.4488 0.4156 0.4348 0.4118 0.4143 0.4022
    0.4739 0.4215 0.4566 0.4179 0.441 0.413 0.4239 0.4064
    2600-2700 0.4627 0.40282800-2900 0.4468 0.39943000-3100 0.4324 0.3953250-3400 0.4164 0.3889
    27C 0.465 0.4229C 0.4488 0.415631C 0.4348 0.411834C 0.4143 0.4022
    0.476 0.4397 0.4587 0.4349 0.4437 0.4308 0.4214 0.4202
    0.4858 0.4414 0.4671 0.4374 0.4502 0.4321 0.4319 0.425
    2600-2700 0.4739 0.42152800-2900 0.4566 0.41793000-3100 0.441 0.4133250-3400 0.4239 0.4064
    3400-3600-3800K3800-4000-4250K4250-4500-47500K4750-5000-5300K
    代码 X Y 代码 X Y 代码 X Y 代码 X Y
    36A 0.3913 0.363940A 0.3743 0.354545A 0.3571 0.343250A 0.3434 0.333
    0.3967 0.3795 0.3783 0.3692 0.3594 0.3565 0.3445 0.3453
    0.4075 0.3851 0.3871 0.3743 0.3683 0.3626 0.3515 0.3506
    3400-3600 0.4011 0.36893800-4000 0.3824 0.35914250-4500 0.3651 0.34864750-5050 0.3498 0.3378
    0.3913 0.3639 0.3743 0.3545 0.3571 0.3432 0.3434 0.333
    36B 0.3967 0.379540B 0.3783 0.369245B 0.3594 0.356550B 0.3445 0.3453
    0.4025 0.396 0.3826 0.3846 0.3618 0.3705 0.3456 0.358
    0.4143 0.4022 0.3921 0.3903 0.3716 0.3774 0.3535 0.364
    3400-3600 0.4075 0.38513800-4000 0.3871 0.37434250-4500 0.3683 0.36264750-5000 0.3515 0.3506
    0.3445 0.3453
    36C 0.4025 0.39640C 0.3826 0.384645C 0.3618 0.370550C 0.3456 0.358
    0.4086 0.4135 0.3871 0.4009 0.3644 0.3853 0.3468 0.3715
    0.4214 0.4202 0.3973 0.4071 0.3751 0.3929 0.3551 0.378
    3400-3600 0.4143 0.40223800-4000 0.3921 0.39034250-4500 0.3716 0.37744750-5000 0.3535 0.364
    38A 0.3824 0.359142A 0.3651 0.348647A 0.3498 0.337853A 0.3364 0.3274
    0.3871 0.3743 0.3683 0.3626 0.3515 0.3506 0.3368 0.339
    0.3967 0.3795 0.3783 0.3692 0.3594 0.3565 0.3445 0.3453
    3600-3800 0.3913 0.36394000-4250 0.3743 0.35454500-4750 0.3571 0.34325000-5300 0.3434 0.333
    0.3824 0.3591 0.3651 0.3486 0.3498 0.3378 0.3364 0.3274
    38B 0.3871 0.374342B 0.3683 0.362647B 0.3515 0.350653B 0.3368 0.339
    0.3921 0.3903 0.3716 0.3774 0.3532 0.364 0.3372 0.3511
    0.4025 0.396 0.3826 0.3846 0.3618 0.3705 0.3456 0.358
    3600-3800 0.3967 0.37954000-4250 0.3783 0.36924500-4750 0.3594 0.35655000-5300 0.3445 0.3453
    0.3368 0.339
    38C 0.3921 0.390342C 0.3716 0.377447C 0.3532 0.36453C 0.3372 0.3511
    0.3973 0.4071 0.3751 0.3929 0.3551 0.378 0.3377 0.3638
    0.4086 0.4135 0.3871 0.4009 0.3644 0.3853 0.3468 0.3715
    3600-3800 0.4025 0.3964000-4250 0.3826 0.38464500-4750 0.3618 0.37055000-5300 0.3456 0.358
    5300-5700-6050K6050-6500-7000K7000-7500-8200K
    代码 X Y 代码 X Y 代码 X Y
    57A 0.3285 0.32165A 0.3156 0.30975A 0.3037 0.2973
    0.3285 0.3322 0.3142 0.3186 0.3014 0.3058
    0.3368 0.339 0.322 0.3264 0.3072 0.3118
    5300-5700 0.3364 0.32746050-6500 0.3225 0.31587000-7500 0.3091 0.3027
    0.3285 0.321 0.3156 0.309 0.3037 0.2973
    57B 0.3285 0.332265B 0.3142 0.318675B 0.3014 0.3058
    0.3285 0.3438 0.3128 0.3287 0.2991 0.3147
    0.3372 0.3511 0.3214 0.3374 0.3053 0.3212
    5300-5700 0.3368 0.3396050-6500 0.322 0.32647000-7500 0.3072 0.3118
    0.3285 0.3322
    57C 0.3285 0.343865C 0.3128 0.328775C 0.2991 0.3147
    0.3285 0.3559 0.3113 0.3392 0.2966 0.3239
    0.3377 0.3638 0.3209 0.3489 0.3033 0.331
    5300-5700 0.3372 0.35116050-6500 0.3214 0.33747000-7500 0.3053 0.3212
    60A 0.3225 0.315870A 0.3091 0.3027
    0.322 0.3264 0.3072 0.3118
    0.3285 0.3322 0.3142 0.3186
    5700-6050 0.3285 0.3216500-7000 0.3156 0.309
    0.3225 0.3158 0.3091 0.3027
    60B 0.322 0.326470B 0.3072 0.3118
    0.3214 0.3374 0.3053 0.3212
    0.3285 0.3438 0.3128 0.3287
    5700-6050 0.3285 0.33226500-7000 0.3142 0.3186
    60C 0.3214 0.337470C 0.3053 0.3212
    0.3209 0.3489 0.3033 0.331
    0.3285 0.3559 0.3113 0.3392
    5700-6050 0.3285 0.34386500-7000 0.3128 0.3287
    Requirements for application and reflow soldering
    Reflow Soldering
    Pre-heat 120~160℃
    Pro-heat time 120 seconds Max.
    Peak temperature 245℃ Max.
    Soldering time 10 seconds Max.
    Condition Refer to Temperature-profile
    After reflow soldering rapid cooling should be avoided
    Use the following conditions shown in the figure.

    1.Reflow soldering should not be done more than two times
    2.When soldering,do not put stress on the LEDs during heating
    Handling Precautions
    Compare to epoxy encapsulation that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more prone to damage by external mechanical force. As a result, Special handling precautions must be observed during assembling using silicone encapsulated LED product, Failure to comply might leads to damage and premature failure of the LED.

    ♦ Handle the component along the side surface by using forceps or appropriate tools; do not directly touch or handle the silicone lens surface, it may damage the internal circuitry.

    ♦ Do not stack together assembled PCBs containing LEDs. Impact may scratch the silicone lens or damage the internal circuitry.

    ♦ Not suitable to operate in acidic environment, PH<7.

    ♦ LED operating environment and sulfur element composition cannot be over 25 PPM in the LED mating usage material.

    When we need to use external glue for LEDs application products, please make sure that the external gluematches the LEDs packaging glue. Additionally ,as most of LEDs packaging glue is silica gel, and it has strong Oxygen permeability as well as strong moisture permeability; in order to prevent external material from getting into the inside of LEDs, which may cause the malfunction of LEDs, the single content of Bromine
    element is required to be less than 225 PPM,the single content of Chlorine element is required to be less than225PPM,the total content of Bromine element and Chlorine element in the external glue of the applicationproducts is required to be less than 375 PPM.

    ♦ The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top ofpackage. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should betaken to avoid the strong pressure on the encapsulated part. So when using the picking up nozzle, the pressureon the silicone resin should be proper.

    ♦ Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristicssuch as the lower forward voltage, or the not light at low current, even not light. All devices, equipment andmachinery must be properly grounded. At the same time, it is recommended that wrist bands oranti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.

    Storage
    ♦ Before opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less. The LEDs shouldbe used within a year.

    ♦ After opening the package, the product should be stored at 30℃ or less and humidity less than 10% RH, andbe soldered within 24 H. It is recommended that the product be operated at the workshop condition of 30℃or less and humidity less than 60% RH. If unused LEDs remain, they should be stored in moisture proofpackages, such as sealed containers with packages of moisture absorbent material (silica gel). It is alsorecommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bagagain.
    Reliability
    (1)TEST ITEMS AND RESULTS
    Type Test Item Ref.Standard Test Conditions Note Number of Damaged
    Environmental
    Sequence Resistance to Soldering Heat(Reflow Soldering) JESD22-B106 Tsld=260℃,5sec 2 times 0/100
    Temperature Cycle JESD22-A104 -40℃30min ↑↓5min
    100℃ 30min 100 cycle 0/100
    Thermal Shock JESD22-A106 -40℃15min ↑↓5min
    100℃ 15min 100 cycle 0/100
    High Temperature Storage JESD22-A103 Ta=100℃ 1000 hrs 0/100
    Low Temperature Storage JESD22-A119 Ta=-40℃ 1000 hrs 0/100
    Power temperature Cycling JESD22-A105 On 5min -40℃>15min
    ↑↓ ↑↓<15min
    Off5min 100℃>15min 100 cycle 0/100
    Operation
    Sequence Life Test JESD22-A108 Ta=25℃
    IF=100MA 1000 hrs 0/100
    High Humidity Heat
    Life Test JESD22-A101 80℃RH=80%
    IF=100MA 1000 hrs 0/100
    2) CRITERRIA FOR JUDGING THE DAMAGE
    Item Symbol Test Conditions Criteria for Judgement
    Min. Max.
    Forward Voltage VF IF=100MA — U.S.L*)×1.1
    Reverse Current IR VR=5V — U.S.L*)×2.0
    Luminous Intensity IV IF=100MA L.S.L**)×0.7
    U.S.L.:Upper Standard Level L.S.L.:Lower Standard Level
    Packaging Specifications
    Package Tape Specifications:(4000 pcs/Reel)
    Dimensions of Tape(Unit:mm) (Reel Lead Min.60mm No LEDs)
    Company:
    Patents:China Smd Led
    website:http://www.smd-emc-led.com/smd-led/

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

©2020 SuccessValley| All Right Reserve

Positive SSL
or

Log in with your credentials

or    

Forgot your details?

or

Create Account